Operation; Optional Accessories; Maintenance; Fig.4 - Makita DUB362 Instruction Manual

Installing the long nozzle
► Fig.7: 1. Long nozzle 2. Triangle marking
To install the long nozzle:
1. Align the small projection of the housing with the
groove of the long nozzle.
2. Slide in the long nozzle, and turn it clockwise until
the triangle markings on the long nozzle and the
housing meet each other.
► Fig.8
The length of the nozzle can be adjusted by changing
the locking position.
Installing the extension nozzle/ flat
nozzle (optional accessory)
The extension nozzle / flat nozzle can be installed on
the tip of the long nozzle in the same way as above.
Installing the shoulder strap
(optional accessory)
► Fig.9
Hook the shoulder strap onto the hanger of the tool.
Before use, adjust the length of strap so that it is easy
to work with it.

OPERATION

Blowing
► Fig.10
CAUTION:
• Do not place the blower on the ground while it is
switched on. Sand or dust may enter from suc-
tion inlet, and they may result in personal injury.
Hold the blower firmly with a hand and perform the
blowing operation by moving it around slowly.
When blowing around a building, a big stone or a vehi-
cle, direct the nozzle away from them.
When performing an operation in corner, start from the
corner and then move to wide area.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Cleaning
► Fig.11
From time to time, wipe off the outside of the tool using
a cloth dampened in soapy water.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Makita genuine battery and charger
• Shoulder belt
• Extension nozzle
• Flat nozzle
NOTE:
• Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
8 ENGLISH