Steam And Idroject Cleaning (Mod. 3000Id Only); Steam And Vacuum Cleaning; Dsl Function (Digital Steam Lock); Final Operations - Kruger KGV3000D Instruction Manual

will remind of the detergent having run out, to avoid the inconvenience of a constant sound. In this
condition, only the steam and vacuum functions of the device will operate.

8. STEAM AND IDROJECT CLEANING (Mod. 3000ID only)

Model 3000-ID has the same features than 3000, with the additional hot water injection function
(called "Idroject"), that comes out from the fl exible hose.
ATTENTION: when the idroject function is activated, hot water and steam come out from the fl exible
hose; at the same time pressure quickly grows up. Take care not to touch the steam ject coming
from the accessories.
Hot water injection is controlled from light blue button (23a)
To enable this function you should quick push the button and the corresponding light on the
signalling board upon the machine will turns on.
The trigger (20bis) of the pistol grip activates the function and let the water, mixed with steam, comes
out. Pay attention, hot water injection could be used only mixed with steam, so ensure that both
steam and idrojects function are enabled.
To disable the idroject function, you should only repeat the short pression of light blue button (23a)
(steam & vac functions will not be changed).

9. STEAM AND VACUUM CLEANING

It's possible to combine the steam cleaning and thedry/wet vacuum functions. Follow the instructions
given in par. 5 and 6.

10. DSL FUNCTION (Digital Steam Lock)

In this model, you'll fi nd also the DSL feature (Digital Steam Lock): with the same method used for
vacuum and hydroject, also for steam there's the possibility to disable the activation of this feature.
Immediately after the machine start-up, steam regulation is enabled and placed on the 1st position,
if you want to change the regulation you should keep pressed the red (22) button; to enable DSL,
you could anytime shortly push red (22) button and this will disable the steam activation. All steam
led lights on the signalling board will be turned off and the trigger (20bis), doesn't work (activates
no steam exit).
To disable DSL, it only necessary repeat the short pressure of red (22) button, and Steam features
will be available again.
DSL is extreme useful if you need, for example, to use vacuum without have the possibility to
activate accidentally steam or hot water injection (very important if you need to clean fragile objects
or electronics components where steam and water can damage or be dangerous).

11. FINAL OPERATIONS

Cleaning the accessories after using the device isan essential procedure; this safeguards the
effi ciency of the appliance and prevents deposits in thefl exible hose, the extension hoses and in the
recovery tank, which besides being unhealthy may cause them to smell bad.
Act as follows:
- Lift the cover (15) (Fig. 1) and remove the recovery tank and its components (24 + 25) (Fig. 5) (Fig. 11)
- Dispose of waste water (Fig. 12)
- Unmount all the internal parts of the waste tank andwash it all
- Put the washed parts in the right position inside thewaste tank
- Pour clean water in the compartment (25b) (Fig. 5),approx. 500 cc.
kruger.es 26