Control Handle For Vacuum / Steam / Detergent/Idroject Functions; Assembling Of Accessories; Vacuum Function - Kruger KGV3000D Instruction Manual

power. Three different regulations of detergent to be added to steam release can be selected on the
control handle (see control panel, Fig. 3).
• The right functioning of the machine is guaranteed only with the KS Group detergent
• The combined cleaning system with steamand detergent should only be used on itemswhich do
not deteriorate if they come intocontact with such substances.
2. CONTROL HANDLE FOR VACUUM/STEAM/DETERGENT/
IDROJECT FUNCTIONS (Fig. 4, 4.1 and 4.2)
16 Flexible hose socket
17 Double function fl exible hose (steam release / dry and liquid vacuuming)
18 Steam / vacuuming / detergent / idroject handle
20bis Steam control button
21 Vacuum enabling switch (white)
22 Steam enabling switch (red)
23 Detergent switch (green)
23a Idroject switch (light blue)

3. ASSEMBLING OF ACCESSORIES

All accessories (18-30-31) can be connected to the handle and/or to the extensions by simply
inserting the end of a component into them and by rotating the locking ring.
4. PRELIMINARY MEASURES

4.1 VACUUM FUNCTION

Lift the cover (15) (Fig. 7) and the sealing element to cover tank (24) (Fig. 6) and pour drink water in
the tank (25b) (Fig. 8): -about 500 cc.
Put the sealing element (24) and the cover (15) back in place.
Warning: An electronic system with warning signal prevents the vacuuming function from
activating if there is no or unsuffi cient water in the compartment (25b) of the tank (25) (Fig.6).
The level fl oat gauge (26) (Fig. 7) inside the tank (25) indicates the water level. In case there is
too much water in the tank (25), empty it.
CAUTION:
It is very important to use the anti-foam product recommended by the manufaturer in order to
prevent the formation of foam in the dirty water basket. The manufacturer assumes no responsibility
for damages resulting from failure to comply with this requirement and / or use of products other
than those recommended.
CAUTION:
It is very important to keep clean the dirty water basket clean and its components, especially the fl oat
element. Make sure it is free to slide in and not obstructed in any way, this may cause malfunction of
the level detection in the dirty water basket and can cause damage to the machine. The manufacturer
assumes no responsibility for damages resulting from failure to comply with this requirement.
kruger.es 23