3.1.7
LAN1, LAN2, LAN3 and LAN4 connectors
Four Ethernet connectors (type RJ45) for PC/lap tops, routers, wireless access points. The
maximum cable length per connection is 100 m. Depending on the VMU connected, a
LAN connector may be used for modem control.
Cable type: CAT5, shielded.
For information how to configure the LAN network see To configure the LAN network on
page 5-29.
Outline
Table 3-6: Ethernet connector, outline and pin assignment
3.2
Interfaces of the VMU
For interfaces of the VMU and how to connect a VMU correctly to the ACU the user
documentation of the VMU. For step-by-step guidelines how to set up the VSAT modem
see Appendix C, VMU settings.
Figure 3-4: LAN connectors
Pin
1
2
3
4
5
6
7
8
Pin function
Wire color
Tx+
White/orange
Tx-
Orange
Rx+
White/green
Not connected
Blue
Not connected
White/blue
Rx-
Green
Not connected
White/brown
Not connected
Brown
Interfaces of the VMU
3-5