Cleaning - Philips Norelco SmartTouch-XL 9190XL User Manual

ENGLISH
22

Cleaning

C
◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF and remove from
charging stand before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Unplug the charging stand. The charging stand
may be wiped clean using a damp cloth.
C
The faucet symbol will start blinking after
1
each shave to remind you that the razor
needs to be cleaned.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the
razor heads is to rinse them after each use or
at least once a week with hot water: Water
from the tap should be on a hot setting, BUT
BE CAREFUL TO TEST WATER FIRST SO AS
NOT TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
Always turn razor OFF, unplug from outlet
1
and remove cord from razor or charging
stand before cleaning.
C
Press the Razor Head Release Button, flip
2
open the Razor Head Assembly.
C
Clean inside razor heads and hair chamber
3
by running under hot water.
C
Clean outside of Razor Head Assembly by
4
running under hot water.
Close the Razor Head Assembly and shake
5
off excess water.
C
Open Razor Head assembly again and
6
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C
If the shaving unit becomes detached from
7
the shaver, you can easily reattach it.
ENGLISH
23