System Information - LAUNCH TECH X-431 IV User Manual

LAUNCH
Figure 5-40
5.4.1.5 Language
You can make selection among several
languages for convenient operation of the
system.
Figure 5-41
1) In the Control Panel interface, click
'Language' icon to open the Language
interface. See Figure 5-41.
2) Select the language you want to use.
3) Click [OK] button to confirm the selection
and close the language interface and the
X-431IV English User's Manual
Control Panel interface.
Note: Before selecting language, be sure to
quit all applications.

5.4.2 System Information

5.4.2.1 Calibrate Touch screen
It is for getting the desired accuracy of the
touch screen. Calibrating of touch screen can
be divided into two steps. The first step is to
detect noise automatically. If you click the touch
screen at this step, the noise value would be
affected. After detecting the noise, the system
will come to the calibration step. Then the cross
cursor will be displayed.
1) After switching on the machine, follow the
tips to press the hot key. The calibration
interface will be opened.
2) Click the cross cursor on the screen
accurately, and wait until it changes. Then
one step of calibration is finished.
3) After calibration is finished for all corners,
the system will automatically return to the
start-up main interface.
Note:
♦ Do not click the touch screen before the
cross cursor appears.
♦ In the calibration step, if you fail to click
the cross cursor accurately, the cross
cursor will be displayed on the screen
again and again until the calibration is
finished completely.
5.4.2.2 User Register
The user's right can be well protected after
registration.
1) Click [Start] button.
2) Select 'Information' in the pop-up menu.
3) Select 'User' in the pop-up list to open the
User Information interface. (See Figure
5-42)
4) In the User Information interface, activate
Soft Keyboard, and input the user
information. (See Figure 5-43)
Click [OK] button to save the information
5)
and close the User Information interface.
41