LAUNCH TECH X-431 IV User Manual page 44

LAUNCH
7) Save the information:
After editing the application, click [OK]
button. The modified information will be
saved in the corresponding file. If you
want to quit the modification, click [Cancel]
button.
Note:
Quit all other applications before saving the
modification.
Figure 5-35
5.4.1.2 Power Management
In the Power Manager interface, you can see
the condition of memory, and set the standby
time. (See Figure 5-36)
1) In the Control Panel interface, click
'Power' icon to open the Power Manager
interface.
2) Click the button to the right of 'Standby
time', and select the time or 'None' in the
pop-up list.
3) Click [OK] button to save the setting and
close the Power Manager interface.
X-431IV English User's Manual
Figure 5-36
5.4.1.3 Clock
User can set the time and the time zone of the
system.
Figure 5-37
Set Time:
1) In the Control Panel interface, click 'Clock'
icon to open the Date/Time interface as
shown in Figure 5-37.
2) In the Date/Time interface, click [Set Time]
button to open the Set Time interface as
shown in Figure 5-38.
39