Special Function - LAUNCH TECH X-431 IV User Manual

LAUNCH
Only with this function, could the saved data be
available and the related file be visited.
Figure 3-20
In figure 3-20, click [DISPLAY], all the saved files
of the DataStream will be listed out. A file
indicates the name of the diagnostic program
used, the date and the time of the recording,
these information enable user find out the
needed records.
Figure 3-21
In figure 2-60, select a desired file and click
[DISPLAY], one frame of the data will be
X-431IV English User's Manual
displayed as shown in figure 3-22, click <—or
—> to view the previous or next frame of the
data. View and consider the data to find out the
changes as well as the similarities and
differences before/after the fault, thus to facilitate
the analysis and removal of the faults.
Figure 3-22
3.2.4.3 Clear DataStream
How many data could be recorded is subject to
the storage in the CF card. Clear the data if the
CF card storage is not enough or there is some
unnecessary data record. Enter the interface as
shown in figure 3-20 and choose [CLEAR], then
click [OK] from the dialog box to delete, and the
file is removed from the CF card.

3.2.5 Special function

Click [Special function] in Figure 3-7 to enter
function selection interface, and then select the
desired one to perform.
17