Led Color; Specifications; Operating Instructions - Lectrosonics CHS12LB50 Instruction Manual

Operating Instructions

1) Connect the power supply and turn on the power.
2) Observe the polarity marker and the corner notch
in the battery.
3) Insert the battery with the notch in the battery on
the right side, as indicated by the polarity marker
on the front panel. Press gently on the battery to
fully insert it and lower the outside edge so the
tabs in the battery slot hold the battery in place.

Specifications

Power requirements: 15VDC, 3A max.
Battery charging time: 4 hours
Dimensions:
Weight:
With batteries:
Without batteries:
Rio Rancho, NM
19.00 in. wide
3.4 in. deep
1.75 in. high
2.15 lbs. (34.3 ozs.)
1.68 lbs. (26.8 ozs.)
Rack Mount Battery Charger
When a battery is being charged the LED next to it will
glow RED. When the battery is fully charged, the LED
will glow GREEN.
If a fault occurs, the power to the slot will be disabled
and the LED will turn off.
STATE
Charging
Fully charged
Timer fault*
No battery present
*A timer keeps track of the charging activity and turns the
LED off if the battery cannot be charged after a period of
several hours.
4) To remove the battery, pull up on the end of the
battery so it clears the tabs, then pull outward to
remove it.

LED COLOR

RED
GREEN
OFF
OFF
7