Detaching The Front Panel; Setup Menu - Pioneer MVH-390BT Owner's Manual

Indication Description
Appears when repeat play is set (except when BT AUDIO is
selected as the source).
Appears when the iPod control function is set (page 9).
Appears when a Bluetooth connection is made (page 9).

Detaching the front panel

Detach the front panel to prevent theft. Remove any cables and devices
attached to the front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.

Setup menu

When you turn the ignition switch to ON after installation, [SET UP :YES]
appears in the display.
1
Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer
not to set at this time, turn the M.C. dial to select [NO], then press to
confirm.
2
Turn the M.C. dial to select the options, then press to confirm.
Menu Item
LANGUAGE
CLOCK SET
FM STEP
PHONE CONNECT
Attach
3
4
NOTES
• You can cancel the menu setting by pressing SRC/OFF.
• These settings can be made at any time from the SYSTEM settings (page 18) and INITIAL
settings (page 6).
Canceling the demonstration display (DEMO
OFF)
1
2
3
To proceed to the next menu option, you need to confirm your selection.
Description
Select the language to display the text information from
a compressed audio file.
[ENG](English),
[РУС](Russian),
[TUR](Turkish)
Set the clock.
Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
Select the type of device and the appropriate connection
method according to your device.
[IPHONE/IPOD],
See page 19 for details on the connections for each
[ANDROID],
device.
[OTHERS]
• Select [OTHERS] when you connect a mobile
device other than iPhone/Android.
[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select
[QUIT :NO], then press to confirm.
Press the M.C. dial to confirm the settings.
Press the M.C. dial to display the main menu.
Turn the M.C. dial to select [SYSTEM], then press to confirm.
Turn the M.C. dial to select [DEMO OFF], then press to confirm.
5
En