Table Of Contents; Symbol Interpretation; Safety Precautions - Active 2.6 L Owner's Manual

1. Symbol interpretation......................................................................................................................................................................Pag. 12
2. Safety precautions....................................................................................................................................................................................12
3. Description.................................................................................................................................................................................................13
4. Specifications and Declaration of conformity.......................................................................................................................................14
5. Assembly....................................................................................................................................................................................................15
6. Use of brushcutter...................................................................................................................................................................................16
7. Preparing for use.......................................................................................................................................................................................16
8. Regular maintenance................................................................................................................................................................................17
9. Storage........................................................................................................................................................................................................17
10. Warranty certificate................................................................................................................................................................................18
Warning,danger and caution
Read operator's instruction book before
operating this machine
Wear safety head,eye and ear protection.
1-Read and understand this manual before operating this
unit. Follow all warnings and safety instructions. Save this
manual for future reference.
2-Use only genuine replacement parts, failure to do so
may cause poor fit and possible injury.
3-Wear appropriate clothing and safety article such as:
boots, heavy duty trousers,gloves,protective eye wear, ear
protection and protective helmet.
4-Do not wear loose clothing or unlaced items.
5-Keep all by standers, children and pets at least 15 mt.
(50 feet) during brushcutter use.
6-Do not operate this brushcutter when you are tired, ill or
under the influence of alcohol, drugs or medication.
Replacement or if the disk appeared cracked,
schegggiati or damaged in any way
7-Do not allow children to use the brushcutter.
8-Keep firm footing and balance. Keep cutting attachment
below waist level.
9-Use the brush cutter only for the tasks explained in this
manual.
10-Inspect unit before each use, make sure that the throttle
lever works freely, that the blade is free to move and is not
in contact with any foreign object, fuel leaks.
Replacement or if the disk appeared cracked,
schegggiati or damaged in any way
11-Start the brushcutter only in well-ventilated areas.
Breathing exhaust fumes can kill.
12-Make sure that the blade guard or the head and all
shields are properly and securely attached.
13-Carry the brushcutter with the engine off and with the
protective blade cover on.
14-never use for examp!e, wire or wire-rope which can
break off and become a dangerous projectile.
CONTENTS

1. SYMBOL INTERPRETATION

2. FOR YOUR SAFETY
15-Never touch the blade or attempt any maintenance work
while the engine is running. Wear protective gloves when
handling or performing maintenance on the blade.
16-When the engine is turned off make sure the cutting
attachment has stopped before the unit is set down.
17-Stop engine and allow to cool before refueling, fill the
fuel tank with the engine off and away from heat sources
and do not smoke while filling the tank or mixing fuel.
18-Do not remove the fuel tank cap when the engine is
running.
19-Wipe spilled fuel from the unit. Move at least 3 Mt.
(10 feet) from fuel in site before starting engine.
20-Do not use fueling for cleaning operations.
21-Do not check the spark plug near the cylinder port.
22-Never work with a damaged muffler.
23-Clear the area to be cut before each use. Remove all
objects such as rocks, broken glass, nails, wire or
string etc.which can be thrown or become entangled in
the cutting attachment.
24-Before storing, allow the engine to cool and empty
the fuel tank.
25-Store the unit so that sharp objects will not
accidentally cause injury, away from heat sources and
off the ground.
26-Do not start the engine with the transmission not
mounted.
27- Be sure the cutting attachment is properly installed
and securely fastened.
28- Replacement or if the disk appeared cracked or
damaged in any way
29-Wear protective gloves when handling or performing
maintenance on the blade.
30- With the engine idling, the blade should not turn. If it
does, regulate the idle adjustment screw.
ENGLISH
GB
Keep all by standers at
least 15 mt. (50 feet)
Choke full opened, run.
Choke closed, starting
when engine is cold.
13