Do you have a question about the task sentinel TS-1001 and is the answer not in the manual?
Questions and answers
RUPINDER SINGH
June 25, 2025
tank 1 show NO PROB
2 comments:
Mr. Anderson
June 25, 2025
"NO PROB" for tank 1 on the Incon Task Sentinel TS-1001 indicates that no probe has been assigned to tank 1, or the system is not receiving a signal from the assigned probe. This may also occur if the probe is not properly programmed or connected.
This answer is automatically generated
RUPINDER SINGH
June 25, 2025
@Mr. Anderson THANK YOU FOR ANSWERING. HOW TO FIX IT?
Greg Gearhart
July 30, 2025
Looking for a company that can trouble shoot system. location is Middleburg Va area.
Christopher s Beery
June 25, 2025
How do I test the high limit alarm to ensure my light and speaker box mounted on my store trips/activates?
Need help?
Do you have a question about the task sentinel TS-1001 and is the answer not in the manual?
Questions and answers
tank 1 show NO PROB
"NO PROB" for tank 1 on the Incon Task Sentinel TS-1001 indicates that no probe has been assigned to tank 1, or the system is not receiving a signal from the assigned probe. This may also occur if the probe is not properly programmed or connected.
This answer is automatically generated
@Mr. Anderson THANK YOU FOR ANSWERING. HOW TO FIX IT?
Looking for a company that can trouble shoot system. location is Middleburg Va area.
How do I test the high limit alarm to ensure my light and speaker box mounted on my store trips/activates?
HOW TO FIX NO PROBE ON TANK1?