MIS-4220 / MIS-4220R / MIS-4230
5.2. Start MSCS
y
MSCS is an application program needed to control MPDP.
y
When you execute MSCS (v 4.0) for your product at the installation screen, it will create a new folder
at C:\Program File\MSCS (v4.0) and an icon on your computer screen.
y
By double clicking the MSCS (v 4.0) icon, the initial screen image of MSCS (v 4.0) will be
displayed as shown in the picture.
Main Image of MSCS (Multi Screen Control system)
※InputsourceisnotdisplayedontheMSCSscreen,butitisindicatedbycolors.
※ D VI:Yellow,PC:Green,DTV:Pink,DVD:Purple,S-VIDEO:Brown,VIDEO:Gray
Downloaded From TV-Manual.com Manuals
28
Infinitely Expandable
5.3. Setting 'Com Port'
y
Com Port connects or disconnects the communication between PC and MPDP.
y
Connect MPDP to PC Com Port via RS-232C cable.
Communication Setting
y
Go to MSCS Menu → Communication and set Com Port. Click 'Connect' using mouse or press 'Ctrl+C'
using keyboard.
y
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using keyboard.
y
When you use USB-to-RS232C converters, you need to set Com Port again, because MSCS uses one
of Com Port no. 1 to 30.
5.4. "new design/Last design" setting
When Com Port is successfully connected, pop-up window for "New design/Last design" appears.
New/Last Design Set
y
Click "Open New Design" to prepare new configuration.
y
Click "Open Last Design" to go to last design before closing.
29