Advertisement
Table of Contents
- 1 Using the Unit Safely
- 2 Important Notes
- 3 Panel Description
- 4 Front Panel
- 5 Guitar Channel (Lower Row)
- 6 Common to both Channels
- 7 Rear Panel
- 8 Foot Control
- 9 Turning the Power On/Off
- 10 Specifying the Harmony Reference Pitch
- 11 Using the Looper
- 12 Main Specifications
- 13 Block Diagram
- Download this manual
Acoustic Singer Live
ACS-LIVE
Acoustic Singer Pro
ACS-PRO
Main Features
Acoustic Singer is an amp that's designed to let the singer-instrumentalist perform powerfully on acoustic guitar and
vocals.
5 Independent mic and guitar channels are provided, and can be mixed.
5 A newly developed two-way speaker is bi-amped to deliver clear and powerful sound.
5 You can automatically add harmony to your vocal along with your guitar performance.
5 The mix of your vocal and guitar sound can be recorded and used for loop performances.
5 Independent effects are provided for the mic channel and guitar channel.
MIC channel
Anti-feedback, delay/echo, reverb
GUITAR channel
Acoustic resonance, anti-feedback, chorus reverb
5 A tweeter attenuator button is provided to deliver a milder sound.
5 An AUX input allows you to connect your audio player or other audio source, and the line output can be connected
to your PA system.
Owner's Manual
Acoustic Amplifier
Advertisement
Table of Contents
Related Manuals for Boss Acoustic Singer Live ACS-LIVE
Summary of Contents for Boss Acoustic Singer Live ACS-LIVE
- Page 1 Owner’s Manual Acoustic Amplifier Acoustic Singer Live ACS-LIVE Acoustic Singer Pro ACS-PRO Main Features Acoustic Singer is an amp that’s designed to let the singer-instrumentalist perform powerfully on acoustic guitar and vocals. 5 Independent mic and guitar channels are provided, and can be mixed. 5 A newly developed two-way speaker is bi-amped to deliver clear and powerful sound.
-
Page 2: Using The Unit Safely
USING THE UNIT SAFELY Before using this unit, carefully read the sections entitled “IMPORTANT SAFETY INSTRUCTIONS” (inside front cover), “USING THE UNIT SAFELY” (p. 2), and “IMPORTANT NOTES” (p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature of your new unit, read Owner’s Manual in its entirety. -
Page 3: Important Notes
Repairs and Data • Roland and BOSS are either registered trademarks • Noise may be produced if wireless communications or trademarks of Roland Corporation in the United devices, such as cell phones, are operated in the •... -
Page 4: Panel Description
Panel Description Front Panel Mic Channel (Upper Row) [DELAY/ECHO] knob This is the channel for connecting a vocal mic. MIC jack Applies delay/echo to the audio that is input from the MIC jack. Turn the knob to adjust the depth of the effect. Connect your mic here. -
Page 5: Guitar Channel (Lower Row)
Panel Description [CHORUS] knob Guitar Channel (Lower Row) Applies a chorus effect to the sound that is input from the GUITAR jack. Turn the knob to adjust the depth of the effect. This is the channel for connecting a guitar, such as an acoustic- * Either TYPE1 or TYPE2 is selected depending on the position of electric guitar. -
Page 6: Rear Panel
You must install the USB driver when connecting the unit to Adjust the output level using the [VOLUME] knob of each your computer. channel. Download the USB driver from the BOSS website. For details, refer MIC/MIX jack to Readme.htm which is included in the download. www.boss.info/support/... -
Page 7: Foot Control
FOOT CONTROL Using the GA-FC You can switch on/off the REVERB of each channel, DELAY/ECHO, If you connect a footswitch (sold separately: BOSS FS-6, FS-7, or HARMONY, and MUTE. FS-5U), you can use your foot to control LOOPER operations (p. 9) or turn CHORUS, HARMONY, and MUTE on/off. -
Page 8: Turning The Power On/Off
Panel Description Turning the Power On/Off Specifying the Harmony Reference Pitch * Once everything is properly connected (p. 6), be sure to follow Here’s how to specify the reference pitch that is used when adding the procedure below to turn on their power. If you turn on harmony. -
Page 9: Using The Looper
Panel Description Using the Looper Record-standby Stop/Clear Press the [LOOPER] button To stop, press the [STOP] to enter record-standby button. mode. To clear the phrase, hold down the [STOP] button for at least two seconds while stopped. Record Loop Playback Overdub When audio is input, Play back the loop. -
Page 10: Main Specifications
Main Specifications BOSS Acoustic Singer Pro: Acoustic Amp BOSS Acoustic Singer Live: Acoustic Amp Acoustic Singer Live Acoustic Singer Pro Rated Power 60 W (Woofer: 50 W, Tweeter: 10 W) 120 W (Woofer: 100 W, Tweeter: 20 W) Output MIC INPUT: -33 dBu (2.5 k Ω) Nominal Input GUITAR INPUT: -10 dBu (5 M Ω) -
Page 11: Block Diagram
Block Diagram...
Need help?
Do you have a question about the Acoustic Singer Live ACS-LIVE and is the answer not in the manual?
Questions and answers