Picture 2 Menu - Philips RS232 User Manual

Pict. a
2
q
Format 4:3
Wide screen
Z
Zoom
Â
Zoom factor
‹
Shift
S
Clock frequency
fi
Phase
X
Auto align
4:3
Wide screen

Picture 2 menu

Format
Select to summon a list of available display formats.
Format
Press the cursor up/down to select another display format: 4:3
or Wide screen.
Zoom
Select to activate the zoom function.You may also activate the
Zoom On
zoom function with the
If no zoom is active, press the cursor left/right, up/down to select which part
of the screen will be zoomed.
Zoom factor
Select and press the cursor left/right to adjust the zoom factor
Zoom factor
and to change the magnification of the picture.
If zoom is not active changing the magnification factor will have no effect on
the displayed picture.
Shift (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to move the picture in a horizontal
or vertical way.
&
Use the cursor left/right, up/down to adjust.
é
Press the OK key when done.
Clock frequency (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to adjust the values of the clock
frequency so that especially text can be displayed with an optimal overall
sharpness.
Use the cursor left/right to adjust.
Phase (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you, when necessary, to adjust the pixel phase of the
picture to avoid picture interference.
Use the cursor left/right to adjust.
Auto align (optional, only available in VGA mode on VGA 1 or VGA 2)
This control allows you to automatically adjust the shift, the clock frequency
and the phase in VGA mode.
Press OK to execute.
key on the remote control.
ZOOM ON/OFF
Use of the menus
5