This output cannot be used to daisy chain a second monitor. Serial I/O port RS232 The RS232 connector is only to be used with the monitor as stand alone. This connector allows you to control the monitor via your PC (as a replacement of the remote control).
R6 / AA Use of the remote control Computer Display modes 640x480 Wide VGA 848x480 Wide VGA 852x480 640x480 832x624 1024x768 1152x870 SVGA 800x600 1024x768 SXGA 1280x1024 When a VGA computer is connected, the display selection is made automatically. A message is displayed when the monitor does not support the connected VGA mode.
press repeatedly to select your computer connected to the connector. VGA 1 AV1, AV2, AV3 press to select the peripherals connected to the connector indicated on the monitor. BRIGHTNESS +/- to adjust the brightness level of the picture CONTRAST +/- to adjust the contrast level of the picture ZOOM ON/OFF to activate/de-activate the zoom function.
Pict. a Pict. a Setup º Brightness Contrast Colour temp. à Sharpness Pict. a Brightness Contrast Colour temp. à Sharpness Use of the menus Use of the menus and the menu system & Press the key on the remote control to summon the different menu MENU headers.
Pict. a Format Wide screen Zoom  Zoom factor ‹ Shift Clock frequency fi Phase Auto align Wide screen Picture 2 menu Format Select to summon a list of available display formats. Format Press the cursor up/down to select another display format: 4:3 or Wide screen.
Setup º ‡ Language US English English Nederlands Deutsch Français Español Use of the menus Setup menu Language & Use the cursor down to select é Press the cursor right to enter the list of selectable languages. “ Use the cursor up/down to scroll through the list and to bring up other languages which are not displayed on the screen at present.
Page 9
PC use you can turn on a screen saver in your computer. Philips has built in an automatic shift of the picture in video mode every 5 minutes to avoid this effect and to prolong the life of the screen.
Need help?
Do you have a question about the RS232 and is the answer not in the manual?
Questions and answers