Use Of The Remote Control - Philips RS232 User Manual

VGA
press repeatedly to select your computer
connected to the or
VGA 1
AV1, AV2, AV3
press to select the peripherals connected
to the connector indicated on the monitor.
BRIGHTNESS +/-
to adjust the brightness level of the
picture
CONTRAST +/-
to adjust the contrast level of the picture
ZOOM ON/OFF
to activate/de-activate the zoom function.
See p. 5.
ZOOM IN/OUT
to adjust the zoom factor and to change
the magnification of the picture when
zoom is activated. See p. 5.

Use of the remote control

connector.
2
POWER
B
VGA AV1 AV2 AV3
CONTRAST
BRIGHTNESS
ZOOM ON/OFF ZOOM IN ZOOM OUT
MENU OK
MUTE
V
¬
CH/PR
1 2 3
4 5 6
7 8 9
AV MUTE
0 q
B
to switch to standby or on again
to switch the menu on/off
MENU
cursor buttons to select your choice and
to alter a selected adjustment.
to activate your choice
OK
V no function (except when in
combination with an electronic receiver
box.
¬ no function (except when in
combination with an electronic receiver
box.
CH/PR Program selection
To browse through the sources selected.
to mute the picture or restore
AV MUTE
it (if the monitor is used in monitor
mode).
When activated a green indicator starts
blinking in front of the monitor.
q Picture format
See Picture 2 menu, p. 5.
Press the q key to switch between the
different picture formats.
Use of the remote control
3 3