Software Installation - Windows Pc Usb Connection - Sprint MF975s User Manual

1. On the PC, double-click
 The Safely Remove Hardware window appears.
2. Click USB Mass Storage Device > Stop.
[illustration]
 The Stop a Hardware Device window appears.

If multiple USB devices are connected to the PC, make sure to select the correct device to
remove.
3. Click OK.
[illustration]

Confirm that the mobile broadband device can be safely removed from the PC.
4. Once you see confirmation that the device can be removed safely, remove the micro USB cable
from the PC's USB port.
[illustration]
 Removal is complete.
Cautions for Removing the Mobile Broadband Device
Standby/Hibernation: The mobile broadband device may malfunction if the PC enters standby
(suspend/resume) or hibernation while connected. Be sure to remove the USB connection before
leaving a PC unattended. The device may also malfunction if it is connected before the PC starts or
restarts. Remove the USB connection before starting or restarting the PC.
Web UI: Always exit the Web UI before removing the mobile broadband device USB connection. Do
not remove the connection while any transmissions are active.
Software Installation – Windows PC USB
Connection
When connecting for the first time, the device driver is designed to install automatically on the connected
PC. If there are issues with the installation due to your PC's configuration, you can manually install or
uninstall the device driver software.
Cautions for Device Driver Installation
Removal of Mobile Broadband Device: Do not remove the mobile broadband device during
installation. Improper removal may cause installation failure, system malfunction, or other system
errors.
Connect with Micro USB Cable (Windows)
in the task tray.
46