Controller Led Indicators; Actuators; Related Equipment - Siemens BACnet Owner's Manual

Siemens Industry, Inc.
Building Technologies

Controller LED Indicators

The controller has eleven Light Emitting Diode (LED) indicators (see Figure BACnet
Fume Hood Controller). Table
controller, and the indication of each LED.
LED Type Label
(if present)*
DO DO1 - DO8
Receive RX
Transmit TX
BST BST
"Basic Sanity
Test"

Actuators

Actuators used with the BACnet Fume Hood Controller include electronic damper
motor. This actuator is controlled by the controller to position the damper or air valve.

Related Equipment

Operator Display Panel (ODP)

Sash sensors

Laboratory Exhaust Air Terminal

Differential Pressure Transmitter

Venturi air valves

Air flow sensors

Contact your local Siemens Industry representative for product numbers and more
information.
Owner's Manual
Chapter 1 – Product Overview
Controller LEDs
lists the type, the abbreviation on the
Controller LEDs.
LED
Number
1 – 8 Indicates the ON/OFF status of the DO
associated with it. A glowing LED indicates that
the DO is energized.
9 Indicates, when flashing, that the controller is
receiving information from the field panel.
10 Indicates, when flashing, that the controller is
transmitting information to the field panel.
11 Indicates, when flashing ON and OFF once per
second, that the controller is functioning
properly.
Controller LED Indicators
Indication
125-5093
2015-10-14
9