Charging Your Device - Golf Buddy WT6 User Manual

1.2 Charging your Device

When the watch's power gets critically low, function of Golf, Odometer,
Set Time, GPS Status are all disabled and "LOW POWER" message will
be displayed.
Plug the USB cable into a standard USB port. This USB cable is
compatible with USB ports found on computers, laptops, in
automobiles, or standard 5V AC USB chargers
Insert the Micro USB cable plug into the Micro USB socket of the
watch. Then the screen shown in the image to the left (image B) will
display when the device is connected to the USB charging cable. This
screen indicates USB data connection as well as battery charging.
The battery indicator will display while charging and will display 100%.
When fully charged, remove the Micro USB cable from device
If your WT6 battery stops scrolling when connected and shows a low-battery icon (image A.), it
indicates that a full charge has not been achieved. Check your connection to make sure the
cable is properly aligned with the connector, then allow the WT6 to charge until the battery
shows 100%.
** IMPORTANT : DO NOT USE QUICK-CHARGER AC ADAPTERS TO CHARGE THE WT6 WATCH. DOING
SO MAY CAUSE DAMAGE AND VOID THE WARRANTY. AD ADAPTERS SHOULD NOT EXCEED 5.0V
CHECK YOUR AC ADAPTE'S RATING PRIOR TO USING
A
B
C