Displaying And Maintaining Trill - HP 5920 Series Configuration Manual

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

To associate a TRILL port with a track entry:
Step
1.
Enter system view.
2.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
3.
Associate a track entry with
the interface.

Displaying and maintaining TRILL

Execute the display commands in any view and the reset command in user view.
Task
Display TRILL ardency table
information.
Display brief TRILL information.
Display TRILL FIB information.
Display TRILL GR status.
Display TRILL ingress forwarding
information.
Display TRILL port information.
Display TRILL LSDB information.
Display all ingress entries in the TRILL
multicast FIB (MFIB).
Display all egress entries in the TRILL
MFIB.
Display information about the TRILL
multicast routing table.
Display the TRILL neighbor table.
Display TRILL neighbor statistics.
Display the TRILL RPF check table
information.
Display TRILL topology information.
Display information about the TRILL
unicast routing table.
Display TRILL VR information.
Display the TRILL VR adjacency table.
Command
system-view
interface interface-type
interface-number
trill track track-entry-number
Command
display trill adjacent-table [ count | nickname nickname interface
interface-type interface-number ]
display trill brief
display trill fib [ count | nickname nickname ]
display trill graceful-restart status
display trill ingress-route [ vlan vlan-list ]
display trill interface [ interface-type interface-number | verbose ]
display trill lsdb [ local | lsp-id lsp-id | verbose ] *
display trill mfib ingress [ vlan vlan-id [ local-entry | remote-entry ] ]
display trill mfib transit [ nickname nickname [ prune-entry | rpf-entry
| vlan vlan-id [ mac-address mac-address ] ] ]
display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac
mac-address ] ] ]
display trill neighbor-table
display trill peer [ interface interface-type interface-number ]
display trill rpf-table tree-root nickname
display trill topology [ verbose ]
display trill unicast-route [ nickname nickname ] [ verbose ]
display trill vr [ ipv6 ] [ verbose [ vrid vr-id [ interface interface-type
interface-number ] ] | vrid vr-id ]
display trill vr-adjacent-table [ count | nickname nickname interface
interface-type interface-number ]
24
Remarks
N/A
N/A
By default, an interface is not
associated with any track entries.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents