Table of Contents
Advertisement
PC or PDA
A PC or PDA must also be paired with your mobile phone via the
setting
page 66).
The pairing process will take place on both the mobile and the external device.
Then refer to your PC or PDA user guide for configuration information. Several
data profiles corresponding to the different hardware you will use can be
managed from the
from one to another, depending on your needs. This menu will also let you set
a
Default profile
or deleted (see "Pairing a wireless device" page 66).
Manage calls
Make a call
1
2
Use headset
3
>
BT devices
>
You must turn on both devices before running the pairing process.
Profiles
(e.g. the profile of the most used device) that can be changed
The settings of each wireless device configured are stored in the permanent
memory of your mobile phone. This way, you can freely disconnect the module
and reconnect the battery without loosing the settings.
All operations described below imply that the Bluetooth stand-by duration time
is set to any value except "Never", and that both your mobile and your headset
are switched on.
Also note that your mobile phone doesn't manage resource sharing: if you are
using your mobile to transfer data to/from your PC or PDA, you won't be able to
place a call until you have completed the data transfer.
Put your headset on and:
Å
•
dial your correspondent's number from your phone, or
•
press
and select a name in the list, or
•
press on the Answer/talk button on the headset and pronounce the
voice tag set for a voice dial (see "Voice command and voice dial"
Æ
page 69).
Æ
Press
, then
appears and press
To end your call, simply press:
•
the Answer/end button on the headset, or
•
the hang-up key on your mobile phone.
Detect
submenu (see "Pairing a wireless device"
menu of your phone, and will allow you to switch
or
to select
Use headset
to dial the number.
Settings
>
in the sub-menu that
Communication
67
BT
Advertisement
Table of Contents
