Print Head - Star Micronics LC-4511 Technical Manual

PARTS REPLACEMENT
7.

Print Head

Note:
Fold the head cables according to the dimensions shown below.
( Cable S )
Size : mm
– 42 –
(1) Remove
• Top guide unit [1]
• Colour ribbon holder assy [2]
• Cable holder [3]
• Ribbon holder [4]
• Two screws [5]
• Print head [6]
WARNING
The print head gets hot after printing.
Do not touch it until it cools.
(2) Adjust
• Gap between print head and platen. Refer to
section 1 of Chapter 3.
Size : mm
( Cable L )