Table of Contents
Advertisement
Quick Links
WINEGARD
ConnecT
WF1
®
™
LONG RANGE, HIGH PERFORMANCE WIFI EXTENDER
Owner / User Manual
Models WF-3000 White and WF-3035 Black
Register your product at winegard.com/myantenna
For help, email help@winegard.com or call 1-800-320-9992
Manuel disponible en français
au www.winegard/support
www.winegard.com/connect
2452372
Rev1 11/16
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Winegard ConnecT WF1
Summary of Contents for Winegard ConnecT WF1
- Page 1 ® ™ LONG RANGE, HIGH PERFORMANCE WIFI EXTENDER Owner / User Manual Models WF-3000 White and WF-3035 Black Register your product at winegard.com/myantenna For help, email help@winegard.com or call 1-800-320-9992 Manuel disponible en français au www.winegard/support www.winegard.com/connect 2452372 Rev1 11/16...
-
Page 2: Specifications
(1) RJ45 10/100/1000m Lan Port (IDU only) (1) RJ45 PoE (ODU & IDU) (2) USB 2.0 Ports WARNINGS: Power Rating • Do not paint any portion of the Winegard ConnecT WF1. Painting the system ™ ® Switching, AC Input 100-240v, 1.5A could damage the system and will void the warranty. - Page 3 Using a 1/8” drill bit, pre-drill the holes for each of the screws to hold the mounting feet in place. Add a small bead of manufacturer approved sealant (not provided) to each hole. NOTE: Before using the supplied mounting screws, check with the vehicle manufacturer for any special Drive the screws through the sealant into each hole screw requirements.
- Page 4 Select the desired network and click CONTINUE. See Figure 7. Enter the network password, if prompted. Once the Winegard ConnecT WF1 connects, open a new browser page and the network will display the page shown in Figure 8.
-
Page 5: Guest Network
™ ® Most functions of the Winegard ConnecT WF1 are controlled from the Local Network Settings screen. From the Status Screen, select LOCAL NETWORK SETTINGS from the drop down menu and click SELECT. From here it is possible to do any of the following:... -
Page 6: Maintenance
SELECT. Once on the update software screen, click CHECK FOR LATEST VERSION. See Figure 10. There will be a slight delay while the Winegard ConnecT WF1 compares the current software Figure 11 version to the latest available version. If you have the latest version there is no need to update the software. -
Page 7: Troubleshooting
If this is not the Winegard ConnecT SSID, this address isn’t valid. If you are indeed connected to the correct network, the address may have been changed. To resolve this, press the reset button on the bottom of your indoor unit. -
Page 8: Troubleshooting (Cont)
Rev. 10/14 Winegard is a registered trademark of Winegard Company. Disclaimer: Although every effort has been made to ensure that the information in this manual is correct and complete, no company shall be held liable for any errors or omissions in this manual. Information provided in this manual was accurate at time of printing. If the antenna does not function as expected, please contact Winegard Company at help@winegard.com or 1-800-788-4417, or visit our website at www.winegard.com.
Need help?
Do you have a question about the ConnecT WF1 and is the answer not in the manual?
Questions and answers