Philips DVDR3512V User Manual page 46

Edit Recordings - Recordable DVD
Rename disc
The original disc name is generated
automatically by the recorder. Change
the disc name by following the steps
below.
A
In disc editing menu, use
select { Rename Disc } and press OK.
The keyboard screen appears.
B
Use keys to highlight a
character on the keyboard and press OK
to select.
The maximum input is up to 20
characters.
Use the following keys on the keyboard
screen to edit your input:
: to remove the character to
BkSp
the left of the cursor.
: to remove the character to
Delete
the right the cursor.
: to create a space between
Space
characters.
: to toggle between upper and
Caps
lower case characters.
: to clear the entry fi eld
Clear
completely.
C
To confi rm your entry, select
the keyboard and press OK.
The info panel is now updated.
To cancel the changes, select
the keyboard and press OK.
TIPS: No further recording and editing can be carried out on a full or fi nalised DVD±R.
Press to go back to the previous menu. Press DISC to exit.
46
DVDR3510V_eng_26244.indd 46 DVDR3510V_eng_26244.indd 46
Erase disc (DVD±RW only)
This erases the content of the
DVD±RW. Once the existing content is
erased, it can be used for recording.
A
In disc editing menu, use
select { Erase Disc } and press OK.
keys to
A warning message will appear.
B
Select
NO
confi rm.
Helpful Hint:
– If the DVD±RW is not compatible with this
recorder, you cannot access to the disc editing
menu. To erase the disc content, switch the
recorder to tuner mode and press REC button.
Follow the instruction on the screen to erase
the disc before it can be used for recording.
Record new title
This function allows you to start a new
recording at the remaining empty space
in the DVD±RW.
A
In disc editing menu, use
select { Record New Title } and press
OK.
on
OK
B
Select the source you want to record
from and press REC z to start recording.
on
EXIT
Overwrite disc (DVD±RW only)
This function allows you to start a new
recording from the beginning of a
DVD±RW regardless of the contents of
the disc.
A
In disc editing menu, use
select { Overwrite disc } and press OK.
B
Select the source you want to record
from and press REC z to start recording.
(continued)
keys to
in the menu to proceed or
YES
to abort, then press OK to
keys to
keys to
2007-08-01 1:46:22 PM 2007-08-01 1:46:22 PM