Suggested Pile Height Settings - Kenmore 10325 Use & Care Manual

PILE HEIGHT SELECTION AND SETTINGS
Select a pile height setting by turning the
height adjust selector located on the nozzle.
Adjust
Selector
SUGGESTEDPILEHEIGHT SETTINGS
Attention: Refer to your carpet
manufacturers cleaning recommendations.
Some more delicate carpets may require
that they be vacuumed with the agitator
turned off to prevent carpet damage.
There are four (4) pile height settings on the
vacuum cleaner. For best deep down
cleaning, use the LO setting. However, you
may need to raise the height to make some
jobs easier, such as scatter rugs and some
deep pile carpets, and to prevent the
vacuum cleaner from shutting off.
Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED HI - Medium to deep pile.
MED LO - Low to medium pile.
LO - Most carpets, bare floors combined
with CARPET/BARE FLOOR selector in BARE
FLOOR position, delicate carpets that
require agitator to be turned off.
CAUTION
ABOVE FLOOR MODE
1. When using in Above Floor Mode, verify
that the FLOOR/TOOLS Selector is in the
TOOLS position.
FLOOR/
TOOLS
SeJectol
'2. PressWAND
RELEASEbutton. O
3. Pull up to
release wand for
above floor
cleaning.
-- Handle
O
Wand
Release
Button
4. Slide attachment into the open end of
wand. Use attachments as needed. See
ATTACHMENT USE TABLE. (page 12)
- 10 -