automatically, please ensure that the router's DHCP function is enabled.
DHCP can automatically assign an IP address to your computer. If there
is no DHCP, please set a static IP address and fill in gateway and DNS,
otherwise you cannot access Internet.
5. How do I share resources with users on Internet
through the device?
To let Internet users access internal servers on your LAN such as e-mail
server, Web, FTP, via the device, use the "Virtual Server" feature. To do
so, follow steps below:
Step 1: Create your internal server, make sure the LAN users can
access these servers and you need to know related service ports, for
example, Web server's port is 80; FTP is 21; SMTP is 25 and POP3 is
110.
Step 2: Click "Virtual Server" and select "Port Forwarding" on the
Router's web interface.
Step 3: Input the external service port, for example, 80.
Step 4: Input the internal Web service port, for example, 80.
Step 5: Input the internal server's IP address. For example, if your
Web server's IP address is 192.168. 2.10, please input it.
Step 6: Select a communication protocol used by your internal host:
TCP, UDP or ICMP.
Step 7: Click "OK" to activate the settings.
The following table lists some well-known application and service ports:
Mobile Wireless Modem
49