Page 1
All the photos and product specifications mentioned in this manual are for references only, as the upgrading of software and hardware, there will be changes. And if there are changes, Tenda is not responsible for informing in advance. If you want to know more about...
TED8620B+ ADSL2+ Modem User’s manual Chapter 1 Introduction of TED8620B+ ADSL2+ Modem 1.1Product Features Welcome to use Tenda ADSL2+ Modem TED8620B+ 1.1.1 Features Pure bridge mode,support 64 groups of VPI/VCI setting Max Downstream/Upstream: 24Mbps/1Mbps Max Transmission Distance:6.5 Kms/4miles Excellent and Friendly User Configuration Interface, compliant with the currently popular Server/Browser mode 1.1.2...
TED8620B+ ADSL2+ Modem User’s manual 1.1.3 Data Encapsulation Support RFC 1483 Bridge Support IETF RFC2684 LLC SNAP and IEEE802.1d Enables you to set the VPI/VCI values of the devices flexibly 1.2Unpacking Please unpack and you would find the following items inside: One unit of TED8620B+ ADSL2+ Modem One User’s Manual External Power Adapter (AC9V/1A)
TED8620B+ ADSL2+ Modem User’s manual Pentium 233MHz of above 64MB Memory of above 10M Base-T Ethernet NIC or above, 100M NIC is recommended WIN9X WIN2000 WINXP WINME WINNT 1.4 Introduction of External Components 1.4.1 LED Indicators Figure 1.1 TED8620B+ Front Panel There are 5 LED indicators on front panel of TED8620B+, you can know the working status of the modem through the LED, they indicate as follows:...
Page 6
TED8620B+ ADSL2+ Modem User’s manual Transmission of data is being LAN_ACT Green Blinking process between computer or NIC with TED8620B+ A valid ADSL2+ connection Blinking An invalid ADSL2+ connection ADSL_LINK Green Fast Handshaking Blinking TED8620B+ is sending or ADSL_ACT Green Blinking receiving data 1.4.2...
TED8620B+ ADSL2+ Modem User’s manual computer LINE: port for ADSL2+ line Chapter 2 TED8620B+ Hardware Installation Basic steps of hardware installation are as follows: 1. Connect the power adapter correctly to power port of TED8620B+ 2. Use RJ45 cable to connect the LAN port of TED8620B+ and the NIC port of the computer 3.
TED8620B+ ADSL2+ Modem User’s manual Chapter 3 TED8620B+ Internet Connection 3.1 RFC Static IP Mode to Internet 3.1.1 Introduction This mode is for using fixed IP mode to connect to Internet through ADSL2+, you can set the IP address of your NIC according to the information provided by your ISP or broadband access services provider.
Page 10
TED8620B+ ADSL2+ Modem User’s manual In the figure above, we can see the icon of LAN (If you have more than one NIC, then it may be LANX, X is related to the number of NIC that you have). We can move our mouse to LAN and click the right key and choose “Properties”, then we can open the window of LAN properties, as the figure below: Then we should choose the Internet Protocol (TCP/IP) and click...
Page 11
TED8620B+ ADSL2+ Modem User’s manual If the information offered by the ISP is as follows, configuration is as the figure above: IP Address: 192.168.0.40 Subnet Mask: 255.255.255.0 Gateway: 192.168.0.100 Preferred DNS Server: 202.96.128.86 Alternate DNS Server: 202.96.128.166...
TED8620B+ ADSL2+ Modem User’s manual 3.2 RFC1483 Dynamic IP Access Mode 3.2.1 PPPoE Dial-Up Introduction This mode is suitable of most users, that is to say, in the normal ADSL2+ access, you don’t need any other configuration, you just need to install a PPPoE dial-up software and then you can connect to the Internet.
Page 13
TED8620B+ ADSL2+ Modem User’s manual Please press the button “Next” to continue when the following window appears. Please press “Next” again when the following window appears.
Page 14
TED8620B+ ADSL2+ Modem User’s manual Please press “Next” again when the following window appears.
Page 15
TED8620B+ ADSL2+ Modem User’s manual Please select Directory and press “Next” After installation we can launch the dial-up software WinPoET, as the figure below: Please input the correct user’s name and password in the log in...
Page 16
TED8620B+ ADSL2+ Modem User’s manual window of this software, and press “Connect” and then you will be able to dial up. After identification of user’s name and password, you will be able to connect to the Internet. Note: Please consult your ISP for the Internet information before installing this ADSL2+ modem.
TED8620B+ ADSL2+ Modem User’s manual 4. FAQ 4.1 Does ADSL2+ support share of Internet Access to Internet in LAN? Answer: Yes. And there are three methods to do this. a. Choose the Internet share software which support ADSL2+, and please also pay attention to the sequence of installing the software. You should first install the PPPoE software and then the Internet share software like Sygate.
TED8620B+ ADSL2+ Modem User’s manual to the Internet. Advantages of this method is that the number of computer is not limited ,but you need to equip an extra computer. 4.2 How to set and obtain dynamic IP for LAN users? Answer: Take Win 98 for example: Open the ”Change a setting”, find Network, double click and open Network Properties, select TCP/IP protocol, open Properties of TCP/IP protocol, select...