3-D Tones; Offline Profile - Nokia N75 User Manual

If you want the caller's name to be said when your device
rings, select Options > Customize, and set
name to On. The caller's name must be saved in
To create a new profile, select

3-D tones

3-D tones enable three-dimensional sound effects for
your ringing tones (not all ringing tones support
tones). Press , and select
To enable 3-D tones for all your ringing tones, select
3-D ringing tones > On.
To change the three-dimensional effect for a ringing tone,
do the following:
1
Select Ringing tone and the ringing tone you want
to change.
2
Select Sound trajectory
Trajectory speed—Scroll left or right to adjust the speed
at which sound moves from one direction to another.
This setting is not available for all ringing tones.
Doppler effect—Select On
to appear to change as you get closer to the device, or
further away from it. The ringing tone appears to become
higher as you get closer to the device, and to become
lower as you get further away. This setting is not
available for all ringing tones.
Reverberation—Select the reverb type.
Say caller's
Addr. Book.
Options > Create new.
3-D
Settings > 3-D tones.
and from the following settings:
if you want the ringing tone
To listen to the ringing tone with the three-dimensional
effect, select Options > Play
the stereo loudspeakers on your device, or a stereo headset.

Offline profile

The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network
is turned off, as indicated by
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they
are placed in the outbox to be sent later. If a Bluetooth
connectivity is activated before entering the
profile, it will be deactivated.
Warning: In the Offline profile you cannot make
(or receive) any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a Bluetooth
connectivity was activated before entering the
profile, it is automatically reactivated after leaving the
Offline profile. See "Config.," p. 95.
tone. To listen to 3-D tones, use
in the signal strength
Offline
Offline
93