Default Numbers And Addresses; Contact Groups; Add Ringing Tones For Addresses - Nokia N75 User Manual

Default numbers and addresses

You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In Addr. Book, select a contact, and press
2 Select Options
3 Select the number or address to which you want to add
a default value, and select Assign.
4 Select a number or an address you want to set as
a default.
The default number or address is underlined in the
contact card.

Contact groups

To create a contact group, do the following:
1 In Addr. Book, press
2 Select Options
3 Write a name for the group or use the default name
Group %N, and select OK.
4 Open the group, and select
68
> Defaults.
to open the groups list.
> New group.
Options > Add
5 Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK
To rename a group, select
new name, and select OK.
.
To add a contact to an existing contact group, select
Options > Add to
To remove contacts from a group, do the following:
1 In the groups list, open the group you want to modify.
2 Select the contact and
3 Select Yes
Tip! To check to which groups a contact belongs,
scroll to the contact, and select
to groups.

Add ringing tones for addresses

When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognizes it).
1 Press
and select a contact group.
members.
2 Select Options
tones opens.
to mark it. To add
to add the contact to the group.
Options > Rename, enter the
group:.
Options > Remove from
to remove the contact from the group.
Options
to open a contact card or go to the groups list,
> Ringing tone. A list of ringing
group.
> Belongs