Vacuum Compartment/Auto Drawer - Hitachi R-X730FJ How To Use Manual

Vacuum Compartment
1
Pull out the Vacuum Case.
For how to remove,
Be sure to remove foods contained in the Vacuum Case.
2
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
※ Do not use the detergents, etc.
Aluminum Tray
Vacuum compartment gasket
Request
● Wipe the ceiling of the compartment (platinum catalyst
and LED light) gently. Failing to do so may cause damage.
● If detergents and others except lukewarm water are used
to clean the vacuum compartment gasket, the vacuum
compartment gasket may be damaged, deformed or
change in color, which may cause the vacuum state
unable to keep well.
3
Attach the Vacuum Case.
For how to attach,
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
Auto Drawer
Clean the auto door unit when food falls onto or is caught in the upper part of the auto door unit and when liquid is deposited on the auto door unit.
1
Unplug the power plug.
2
Remove each case of the Lower Freezer or the
Vegetable Compartment.
3
Remove all foods which drop or are caught in.
4
Wipe off deposited liquid soup using a soft and dry cloth.
Caution
● Make sure that water never splash to the Auto Drawer unit. Otherwise, it may cause malfunction.
● Do not disassemble the Auto Drawer unit. Otherwise, it may cause injury and/or malfunction.
● Exercise caution not to move the linkage section. Failing to do so may cause a failure.
Once a month
Pg.70
Vacuum Compartment
Vacuum Container
Gasket seat
Pg.70
Pg.71
When the Vacuum Compartment Gasket is dirt
1
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer's upper right and
remove it by hand
carefully.
2
Rinse dirty portion in water using
a soft sponge, etc.
※ Do not use the detergents, etc.
Vacuum compartment gasket
Wipe off dirt from the groove for attaching the vacuum
compartment gasket.
3
Wipe off excess moisture with a
dry cloth and dry it out naturally.
4
Attach the vacuum compartment gasket.
Align the tab to the notch accurately, and then combine
them together.
Tab
● Make sure to disconnect the power plug from
the power outlet before starting maintenance to
avoid injury.
Tab
Groove for attaching the
vacuum compartment gasket.
Notch of the groove
Warning
Linkage section
Auto Drawer Unit
67