Log; Call Timers; Packet Data - Nokia N73 User Manual

Activate loudsp., or Activate handsfree
headset with Bluetooth connectivity is attached),
active call or End all calls, New call, Conference,
Transfer, and Open active standby. Select from the
following:
Replace—to end an active call and replace it by answering
the waiting call.
Send touch tones—to send touch tone strings, for
example, a password. Enter the touch tone string or search
for it in Contacts. To enter a wait character (w) or a pause
character (p), press repeatedly. Select
tone.
Tip! You can add touch tones to the
or Touch tones fields in a contact card.

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select
Log > Recent calls. The device registers missed and
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.
To clear all recent call lists, select Options
calls in the recent calls main view. To clear one of the call
(if a compatible registers, open the register you want to erase, and select
End Options > Clear
register, scroll to the event, and press

Call timers

To monitor the approximate duration of your incoming
and outgoing calls, press
Log> Call timers.
To set the display of the call timers while a call is active,
select Tools > Log
OK to send the
duration > Yes
Note: The actual time invoiced for calls by your
Phone number
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM', p. 96.

Packet data

Applications >
To check the amount of data sent and received during
packet data connections, press
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
> Clear recent
list. To clear an individual event, open a
.
, and select Applications
> Options > Settings > Show call
or No.
Options > Clear
, and select Tools >
>
67