Copy Contacts; Default Numbers And Addresses; Sim Directory And Other Sim Services - Nokia N73 User Manual

Tip! To check to which groups a contact belongs,
scroll to the contact, and select
groups.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press
delete.

Default numbers and addresses

You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In the address book, select a contact, and press
2
Select Options > Defaults.
3
Select a default to which you want to add a number or
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
62

Copy contacts

Options > Belongs to
To copy names and numbers from a SIM card to your
device, press
contacts > SIM
copy and Options
to
To copy contacts to your SIM card, press
Contacts. Select the names you want to copy and
Options > Copy to SIM
SIM directory. Only the contact card fields supported by
your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.

SIM directory and other SIM services

.
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Press , and select
contacts > SIM directory
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select
SIM contacts
only shown if supported by your SIM card.
, and select Contacts > Options > SIM
directory. Select the names you want to
> Copy to Contacts.
, and select
direct., or Options > Copy >
Contacts > Options > SIM
to see the names and numbers
Options
> Fixed dialing contacts. This setting is
To
>