Samsung NE593 Installation Manual page 19

Hotel TV Function
Category Item
USB Pop-up Screen
External
Source
External Source Banner
Auto Source
Sub Amp Mode
Bathroom
Speaker
Sub Amp Volume
Pillow Speaker Type
Pillow Speaker
Speaker Select
Pillow Volume
Eco Solution Energy Saving
Welcome Message
Edit Welcome Message Edits the Welcome Message.
Hospitality Logo
Logo/Message
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto Initialize
When USB is connected to the TV :
y Default: a popup window appears.
y Automatic: This enters the USB content menu automatically.
y Disable: Neither the popup window nor the menu appears.
If set to On, the TV displays the External Source Banner (information) when you change the TV
source to another external input, press the Info key, or turn the TV on.
y ON: The External Source information is displayed on the TV screen.
y OFF: The External Source information is not displayed on the TV screen.
y ON: When an external input source is connected to the TV, the TV identifies the input source,
and then automatically switches to that input source.
y OFF: Auto Source function is Off.
Determines the Bathroom Speaker sound AMP operation mode.
y 0: Turns the Bathroom Speaker sound AMP function off (PWM off).
y 1: The Bathroom Speaker sound volume follows the TV speaker sound volume identically. The
Bathroom Speaker sound volume is controlled by the TV remote or panel keys.
y 2: The Bathroom Speaker sound volume is controlled by the Bathroom Speaker volume
controller.
The initial Bathroom Speaker sound volume after TV is turned on.
Select the type of Pillow Speaker.
You must select the type of Pillow Speaker currently connected for it to operate properly.
y CZ : the type of Zenith IR Code and 12V Vcc
y CP : the type of Philips IR Code and 5V Vcc
y CS : the type of Samsung IR Code and 12V Vcc
Select the speaker where the TV sound is outputted.
y Main : The TV sound is outputted in all of the TV speaker and Pillow Speaker.
y External : The TV sound is outputted in Pillow Speaker only.
You can control the volume level of Pillow Speaker.
y High : The volume level of Pillow Speaker is high.
y Normal : The volume level of Pillow Speaker is normal.
y Low : The volume level of Pillow Speaker is low.
Adjusts the brightness of the TV to reduce power consumption.
y OFF: Turns off the energy saving function.
y Low: Sets the TV to low energy saving mode.
y Medium: Sets the TV to medium energy saving mode.
y High: Sets the TV to high energy saving mode.
Displays a the Welcome Message for 5 seconds when the TV turns On.
Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo
Display Time".
Downloads the Hospitality logo.
Hospitality logo file requirements:
y BMP or AVI files only.
y Max file size: BMP - 960 X 540. AVI - 30MB.
y The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items
are restored again to their values cloned initially.
Description
19
English