Samsung NE593 Installation Manual page 25

USB Cloning
The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you
create a standard file of settings and distribute that standard file to all the TVs in your facility.
✎ After cloning, certain features are applied when the TV is turned on again.
y Cloning TV to USB: Copies stored menu settings from a TV to a USB device.
1. Insert a USB drive into the
2. Enter the hotel option menu by pressing buttons in order.
MUTE → 1 → 1 → 9 → ENTERE
3. Press the ▲ or ▼ button to select Cl one:TV to USB, and press the
ENTERE button.
4. When the message Clone: TV to USB is displayed. Press the ENTERE
button.
5. The TV displays one of the following messages:
y In Progress: Copying data to USB.
y Completed: Copy was successful.
y Failed: Copy was not successful.
y No USB: USB is not connected.
The clone folder will be labeled T-MST14AKUCB.
✎ The cloned values include the values on the Guest side menu
(brightness, picture size, contrast, etc.) and the Hotel side menu.
Cloning USB to TV: Copies menu settings in a USB device to a TV.
✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTERE button for 5 seconds.
To clone data to the TV using the Hotel menu, follow these steps:
1. Turn the TV off.
2. Insert the USB drive into the USB port on the rear of the TV.
3. Turn the TV on.
4. Enter the Interactive menu by pressing these buttons in order.
MUTE → 1 → 1 → 9 → ENTERE
5. Press the ▲ or ▼ button to select "Clone USB to TV", and then press the
ENTERE button.
6. The message Clone: USB to TV is displayed. Press the ENTERE button.
7. The TV displays one of the following messages:
y In Progress: Copying data to TV.
y Completed: Copy was successful.
y Failed: Copy was not successful.
y No USB: USB is not connected
y No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your USB device.
The folder name should be T-MST14AKUCB.
✎ Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next
page.
USB port on the rear of the TV.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
OFF
25
English