Plasmacluster Operation; Self Clean Operation - IVT 09PR-N Operation Manual

PLASMACLUSTER OPERATION

Plasmacluster ions released into the room
will reduce some airborne mold.
1 During operation, press the PLAS-
MACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp will
light up.
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp will
turn off.
DISPLAY
MODE
CLEAN
FAN
SWING
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
".
1
1h
SET/C

SELF CLEAN OPERATION

SELF CLEAN operation will reduce the
growth mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
1 Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display "
• The blue PLASMACLUSTER lamp will
light up.
• The unit will stop operation after 40 minutes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp will
turn off.
DISPLAY
MODE
FAN
SWING
NOTE:
• You cannot set the temperature, fan speed, air
ÀRZ GLUHFWLRQ RU WLPHU VHWWLQJ GXULQJ WKH 6(/)
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.
GB-9
".
1h
1
CLEAN
SET/C
.