Table of Contents
Advertisement
NETWORK
User's Manual
BACK-UP / RESTORE
On this page you can back up or restore the modem settings.
• To back up the modem
settings, press Back up. A window is
displayed asking whether you want to back up the settings of
your modem on your computer.
• To restore the settings of your
the file you want to restore and click Restore.
The name of the saved file is by default
GatewaySettings.bin.
LAN
On this page you can change the local area network settings
of the router (IP address of the network gateway, subnet
mask, DHCP settings and the assignment of an IP address
to a MAC address).
• To modify the IP address of the network
IPv4 address field. Note: Do not use an IP address in the
range reserved for the DHCP server (lower down the page).
Then click Apply.
• To change the range of IP addresses available for the DHCP
server, edit the First IP address available and Last IP address
available fields, and then click Apply.
• To assign an IP address to a MAC
the MAC address and IP address fields, then click Add.
Make sure the Status is in Active mode. Click Apply.
WAN
This page provides information about the WAN configuration
(Internet).
• To release or renew the IP WAN
WAN address and Renew the IP WAN address.
The WAN Connection Type must be configured for
DHCP. If this is not the case, you may no longer be able
to use the Internet service.
Clicking Release the WAN IP address interrupts the
Internet connection. Click Renew to restore the
Internet connection.
WI-FI MODEM
modem, press Browse, select
gateway, edit the
address, complete
address, press Release IP
8
Hide quick links:
Advertisement
Table of Contents
