General Notes On Operation - MALUX INDUTEL IP Operating Manual

General notes on operation

1. The InduTel IP is the VoIP (Voice over Internet Protocol) version of the telephone
InduTel and is operated on a 10/100 BaseT Ethernet network. The connections are
established with the Session Initiation Protocol (SIP). The operation corresponds to
that of an analogue telephone.
2. The power supply takes place via Power over Ethernet (PoE) from the network or via a
separate direct current voltage source.
3. The programming and parameter setting are carried out solely via the web server of
the telephone. The web server can be reached via the standard web browser of a PC.
In order to access the web server, entering the username and the password is
necessary. The factory settings for the username and password are:
Username:
Password:
The preset IP address is 192.168.0.77
4. The telephone has a handset rest with a magnetic contact as a hook switch. In order
to terminate an existing connection, the handset must be hung up. To interrupt an
existing connection, it is sufficient to press the cut-off key on the keypad.
5. The internal relay contacts only allow tensions of 30 VAC or 60 VDC to be switched.
The maximum permissible current depends on the mode of operation (see chapter
Technical Data)
6. The network connection (LAN) is established via a housing connector.
7. The handset of the telephone is fitted with a stray field coil for connection to hearing
aids. Those who wear a hearing aid with an inductive receiver can receive the signal of
the earphone capsule directly over the hearing aid.
admin
fhf
www.malux.se
3