Table of Contents
Advertisement
Phone Settings
You can configure the "hardware behavior" of the InduTel IP here.
Relay Activation:
There are five options available. "on/off" generally switches the relay on or off. If
"incoming call" is selected, the relay switches to "on" for as long as there is an
incoming call. Selecting "active call" on the other hand ensures that the relay is on
"on" for as long as an existing connection is active. The "switch" function makes it
possible for the relay to be controlled locally from the InduTel IP.
Switch Function:
The code is entered here which must be entered via the keypad (an "internal call" is
involved) when the handset is off its hook in order for the relay to jump to "on" for a
certain period of time (time parameter) before falling back into the "off" status again.
The dialed code is no longer available as a telephone number.
Handset Rest Lights:
With this parameter, the handset rest lighting can either be turned on or off or be
configured as an additional optical signal. If the point "incoming call" is selected, the
LEDs start flashing while the InduTel IP rings.
Keypad Backlights:
The keypad backlights can be turned on or off. In addition, it is possible to set them to
only going on when the handset is off its hook by selecting "off hook".
14
www.malux.se
Advertisement
Table of Contents
