Ir Remote Control - Hill Audio DMW-300 User Manual

Network/fm/usb receiver & player

Hide thumbs

Table Of Contents

Table of Contents

FWD button. FWD is the abbreviation of "FORWARD". This switch with rear illumination allows

a "forward" transport function in certain menus or might be assigned to other functions.

BWD (DELETE) button. BWD is the abbreviation of "BACKWARD". This switch with rear illumi-

nation allows a "backward" transport function in certain menus or might be assigned to other

functions.

PLAY/PAUSE (MUTE) button. This switch with rear illumination allows to change the

replay/mute status (all time lit when PLAY, flashing when PAUSE/MUTE)

IR receiver. This is the optical receiver for the optional IR remote control. Make sure this area

is not covered and a line of sight is provided between this receiver and the IR remote control

to secure proper function.

JGL button. JGL is the abbreviation of "JINGLE". This switch with rear illumination activates the

jingle mode and depending on other settings made, will either activate scheduled replay or

allow one-shot replay of prestored jingles. The backlight is all time on when JGL is disabled, and

flashing when JGL enabled.

Front USB connection. This USB-type-A socket is mainly designated for insertion of a USB

memory device for media replay or firmware updates.

DIRECT ACCESS buttons. A set of 10 direct access keys. All keys have constantly lit rear illumi-

nation, and allow to choose presets directly.

Power switch. Switches the unit on and off. Make sure you switch the unit off when not in use.