Hill Audio DMW-300 User Manual page 14

5.1.1.10. Configuring WEB radio presets
Due to the vast amount of available web radio stations, the DMW300 allows to store up to 600
preset stations in 6 groups. Editing the stations and groups can either be done via the unit's user
interface in SET_MENU>WEB_RADIO or more comfortably via an externl PC and the unit's built-in web
server.
5.1.1.10.1. Editing WEB radio presets using the user interface
Scroll to SET_MENU>WEB_RADIO>MANAGE_STATIONS, then press the wheel to invoke ENTER. Then
edit as follows:
Rename – press ENTER and the Edit name window will pop up with the current name displayed.
Use the FWD/BWD buttons and the NAVIGATION wheel to edit the name. Press ENTER when you
are done. You can also use the default group names: Group 1, Group 2, ....
Move up – exchange position with the station immediately above it
Move down - exchange position with the station immediately below it
Delete – delete the station from the list
Move to... – move it to a group (if you have created at least one group). The top group will be high
lighted and you can choose the group (if there are more than one group) to house the station. Press
ENTER to choose the group and a sub-window showing Open will be displayed. Press ENTER to open
the group and scroll to choose the position to store the station and press ENTER.
Create group – give a name to the group or use the default Group 1/2/3/4, etc... If you want to
use the available default Group as suggested, press Back and choose Save & exit.
Create station – enter the name and URL for Internet radio station and name and frequency for FM
radio of the station. The frequency of FM radio station must be of the format xx.x MHz orxxx.x MHz,
where x is any digit from 0~9.
Edit URL – edit the URL as needed
Similar to the editing of stations by scrolling to SET_MENU>WEB_RADIO>MANAGE_GROUPS, you can
edit the groups by highlighting it, press ENTER and choose Open. However, you cannot create groups
within a group. In other words, the structure of the MY STATIONS list is Root/Group and a station can
reside either in root or in groups (2-level structure).
5.1.1.10.2. Editing WEB radio presets using the embedded server
The embedded server is the most comfortable way of editing the MY STATIONS list and adding new
stations. To use the embedded server, connect your PC to the same local network as the DMW300.
Open the web browser in Internet Explorer or Chrome on your PC. Visit the DMW300's embedded
server by typing the local IP address (the IP address of your Receiver can be found in>Setup >Network
setup >Current status) in web browser's URL window. You will see the following window:
PAGE 13
USER MANUAL - DMW300 NETWORK | FM | USB RECEIVER & PLAYER