Avtech AVC732 User Manual page 9

Step 3： To configure the Server IP, please click
Step 4： Key in User Name, Password, and IP address (User Name and Password are both
default at " admin" ; IP address is 192.168.1.1, Port:80). Then click OK to connect.
Step 5： When you see the control bar, you have successfully logged in the program of the Video
Web Server. Click " System Config" to set up " Network Setting" and " Account
Management" . (e.g. IP address is 61.222.50.174)
NOTE：
1.Please get the IP address with your Internet Service Provider. For example,
we assume it is 61.222.50.174 and the user name and password is " andy" .
2.After the setup, please click " APPLY" to renew the information.
twice to enter the setup.
SYSTEM CONFIG
To add a new User & user's level
S-control all the functions
A-control advanced functions
B-control only basic functions
The maximum length of user name
and password is 8 characters.
7