Environmental Protection And Disposal - Worcester CS 200 Installation Instructions Manual

Fault code - sub-code - [cause or fault description]
Check the bottom cylinder
temperature sensor according to
the table ( Chapter 3, page 5)
Check the voltage at the
terminals of the bottom cylinder
temperature sensor on the solar
module according to the table
( Technical documentations of
the modules MS 100/MS 200).
Table 14 Fault displays with fault code A51
10

Environmental protection and disposal

Environmental protection is a key commitment of the Bosch
Group.
Quality of products, efficiency and environmental protection
are equally important objectives for us. Laws and requirements
aimed at protecting the environment are strictly observed.
In order to protect the environment, we use the best possible
technology and materials within the constraints of economic
considerations.
Packaging
Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling.
All of our packaging materials are environmentally compatible
and can be recycled.
Old electrical and electronic appliances
Electrical or electronic devices that are no longer
serviceable must be collected separately and sent
for environmentally compatible recycling (in
accordance with the European Waste Electrical
and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should
use the return and collection systems put in place in the country
concerned.
Batteries must not be disposed together with your household
waste. Used batteries must be disposed of in local collection
systems.
CS 200 – 6720830475 (2015/06)
If values do not match,
replace the sensor
If the sensor values
matched, but the
voltage values do not
match, replace the
module
Environmental protection and disposal
15