Daikin BRC1E73 Installation And Operation Manual page 62

Installation Manual
3-4 Determine the location where the wiring will enter the
remote controller (back, left side, top left, top center).
3-4-1
Cut off resin area (notched area).
3-4-3
Cut the plastic at the notched area and
remove any remaining burrs.
3-5 Install wiring.
1. Switch box and control wiring are fi led supplied.
2.
Wiring Specifi cations
Wiring Type
Wiring Size
Wiring Length Maximum 1640 feet (500 m)
English
01_EN_3P243521-7L.indd 5
60
Back outlet
Top left outlet
NOTE
Do not touch the remote controller printed-circuit board.
Non-shielded, 2-conductor, stranded copper wire
AWG-18
3-4-2 Left outlet
Cut the plastic at the notched area and
remove any remaining burrs.
3-4-4 Top center outlet
Cut the plastic at the notched area and
remove any remaining burrs.
EDUS721438
5
3P243521-7L
11/27/2014 11:21:42 AM
BRC1E73