Progressive/ Interlace; Video Output Format; Restore Factory Settings - Philips DVDR3375/93 User Manual

Philips dvd player/recorder dvdr3375
Hide thumbs Also See for DVDR3375/93:
Table of Contents

Advertisement

DVD System Menu Options

Progressive/ Interlace

Progressive scan delivers a higher picture
quality than the standard interlaced TV
channel scan. It only works when you
have connected the DVD recorder
Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise,
the image may not appear or will be
distorted. Please check your TV user
manual for more information.
In 'System Menu-General', use  keys
A
to select { Progressive / Interlaced }
and press OK.
{ Interlaced }
Select this to enable interlaced feature.
{ Progressive }
Select this to enable progressive scan feature.
Use  keys to select a setting and
B
press OK to confirm.
Helpful Hints:
– Follow the instructions shown on the TV to
confirm the selection (if any).
– If a blank/distorted TV screen appears,
wait for 10 seconds for the auto recovery.
TIPS:
The underlined option is the factory default setting.
Press  to go back to previous menu item. Press SYSTEM SETUP to exit the menu item.
50
(continued)

Video Output Format

The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
In 'System Menu-General', use  keys
A
to select { Video Output Format } and
press OK.
{ PAL }
Select this if the connected TV has the PAL
colour system. It will change the video signal of
an NTSC disc and output it to PAL format.
{ NTSC }
Select this if the connected TV has the NTSC
colour system. It will change the video signal of
a PAL disc and output it to NTSC format.
Use  keys to select a setting and
B
press OK to confirm.
Helpful Hint:
– If a blank/distorted TV screen appears,
wait for 10 seconds for the auto recovery.

Restore Factory settings

This will restore all the settings of this
DVD Recorder, except for the PIN code.
In 'System Menu-General', use  keys
A
to select { Restore Factory Settings }
and press OK.
A warning message will appear
Select
in the menu to proceed or
B
OK
to abort, then press OK to
CANCEL
confirm.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvdr3375

Table of Contents