Philips DVDR3370H Owner's Manual page 97

You can select also the recording mode '
With these setting the recording mode (bit rate) will be automatically
calculated to use the complete empty space (title '
If the empty space is too small the recording will be stopped to prevent
the following titles from being overwritten.
Do not use this function under the following conditions:
•) more then one programmed recording
•) daily/weekly repeated recordings
May be the calculation of the recording mode can not function properly.
7
If all information is correct, press the
information is stored in a TIMER block.
8
To end, press TIMER s .
9
Insert a recordable disc in the Recorder.
The disc is checked.
10
Locate on the disc the position where you want to start the
recording. Press STOP h .
11 Switch the Recorder off with STANDBY m .
The programmed recording will only function properly when the
DVD Recorder
STANDBY m button.
If any of the TIMER blocks are in use, '
1
Switch on the TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER s on the remote control.
The programming method selected last is marked.
3
Select line '
with C .
The information will be displayed.
4 Select the entry field with D or C .
5
Enter information with B , A or the number buttons 0..9 .
In the entry field '
date.
Programming a recording (TIMER)
' .
OK button. The
has been
' will light up on the display.
' using B or A and confirm
', you first enter the month and then the
').
using the