Philips DVDR3370H Owner's Manual page 29

5
Press STANDBY-ON m on the recorder. '
appear on the display.
6
Switch on your TV and select the channel used for DVD/VCR
playback on your TV. Choose between channel 3 or 4.
The factory setting is for channel 3. However, if you would like to
switch to channel 4, proceed as follows:
Hold 4 on the remote control while '
1
' ' (channel 4) will appear on the display.
2
If you want to switch back to channel 3, hold 3 . '
3
will appear on the display.
7
Switch your TV to the selected channel (channel 3 or 4). Use
therefor your TV remote control.
The menu for language selection will appear on the screen.
a
b Check the cable connections.
b Is 'DVDR' (DVD Recorder operation) lit up in the display?
If not, press the TV/DVD button until 'DVDR' is lit.
b Change between channel 3 and 4 on the TV.
8
This TV channel number must be used in the future for DVD
recorder playback.
Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.
Connecting the DVD Recorder
' will
' is displayed.
' (channel 3)