1
Remove the antenna cable jack from your TV. Insert it into the
ANTENNA IN jack at the back of the DVD recorder.
2
Insert one end of the supplied antenna cable into the TV
OUT jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.
3
Connect the
VIDEO
(CVBS)
corresponding input jacks of the TV.
4
Switch on the TV.
5
Connect the mains jack 4MAINS at the back of the DVD
Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear
on the display. After the initial installation is completed, this
function will be switched off.
6
Press STANDBY-ON m on the recorder.
7
'
' will appear on the display.
8
If necessary, select the channel number of the input jack at the
TV.
The initial installation menu appears on the screen.
9
Select your preferred setting using B or A .
Confirm with OK .
The initial installation is carried out automatically. Please wait until the procedure is completed.
S-VIDEO OUT / AUDIO L/R OUT jacks or
OUT / AUDIO
L/R
OUT with
the
Initial Setup
Menu Language
English
Español
Français
Press OK to continue