Nikon CoolPix A300 Reference Manual page 158

Display
No access.
Wi-Fi connection
terminated.
Turn the camera off and
then on again.
Communications error
System error
Printer error: check
printer status.
Printer error: check
paper.
Printer error: paper jam.
Technical Notes
Error Messages
Cause/Solution
The camera could not receive the signal from the
smart device. Wirelessly connect the camera and
smart device again.
Touch an NFC-compatible smart device to the
camera.
Select Connect to smart device in the
network menu.
The Wi-Fi connection is terminated in the
following situations:
Poor connectivity.
The battery level is low.
A cable or a memory card is inserted or
removed.
Use a sufficiently charged battery, disconnect the
TV, computer or printer and establish the wireless
connection again.
If the error persists, contact your retailer or Nikon-
authorized service representative.
An error occurred while communicating with the
printer.
Turn the camera off and reconnect the USB cable.
An error occurred in the camera's internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-authorized
service representative.
After solving the problem, select Resume and
press the k button to resume printing.*
Load the specified size of paper, select Resume,
and press the k button to resume printing.*
Remove the jammed paper, select Resume, and
press the k button to resume printing.*
143
A
13, 113
12, 113
145
79
145
–
–
–