Acuity Speech Mode; Live View - Rehan ACUITY SPEECH User Manual

Reading aids
This will let you turn reading aids on or off individually.
These functions are originally on.
Refresh rate / frequency
Depending on your location the mains power frequency will be 50 or 60
Hertz. By selecting the right setting you will supress flickering caused by
surrounding light. This function is originally set to 50Hz.
Contrast
With this function you van turn the manual contrast adjustment on or off. This func-
tion is originally on.
White balance
Select whether you want the ability to manually set the white balance in the
photo modes. This function is originally off.
Rehan Electronics
Ver: X.X Cam: X. X

6 Acuity Speech mode

When switching to the Acuity Speech mode after the device has been turned
on you will see an hourglass on screen. This means the device is starting up
its text recognition capabilities.

6.1 Live view

1 2 3
User Manual V1.5
ACuity
Factory reset
On the third and last page
of the advanced settings
you will find the factory
reset. By turning this function on
you will reset the device to factory
settings.
This counts for all advanced func-
tions and the last used magnification
presets.
When the device starts up in Acui-
ty Speech mode it shows this Scan
Screen. In live view you will see a
A4 sized live view of the tableau.
The live view has these controls:
1. Menu (see chapter 6.3)
2. Turn Zone Detection on or
off (see below)
3. Save screenshot of live view
(see chapter 6.4)
4. Read page (see chapter 6.2)
4
9